Connections for a Digital Nonlinear Editing System

This unit can be connected to a nonlinear editor supporting DV/DVCAM with an i.LINK cable (DV cable). Shown below is an example of connections to use this unit as a recorder in a nonlinear editing system.

Notes

•Refer to the documentation of your nonlinear editing equipment and software for more information about connection and settings on the nonlinear editing equipment.

•Different editing software applications provide different editing functions. For more information about actual editing procedures and settings, refer to the documentation of your editing software.

DSR-2000A/2000AP (recorder)

i.LINK

 

 

 

1

VIDEO OUT 3

MONITOR

Nonlinear editing system

(SUPER)

AUDIO

 

2

3

 

Composite video

Audio input

 

input

 

 

1i.LINK cable (DV cable) (not supplied)

275Ω coaxial cable (not supplied)

3Cable with RCA phono plugs (not supplied)

Video monitor

Settings on the DSR-2000A/2000AP

Control

Setting

 

 

REMOTE button

Lit

 

 

9PIN button

Unlit

 

 

i.LINK button

Lit

 

 

Notes

•When you connect this unit to another device with a 6-pin DV connector, always power the other device off and unplug its power cord from the power output before connecting or disconnecting the i.LINK cable (DV cable). If you connect or disconnect the i.LINK cable (DV cable) with the power cord still plugged in, power from the DV connector may flow into this unit, possibly damaging this unit.

•When you connect this unit to another device with a

6-pin DV connector, make the connection to the 6-pin DV connector on the other device before making the connection to this unit.

and Connections 7 Chapter Settings

Chapter 7 Connections and Settings

125