Location and Function of Parts

Overview 1 Chapter

2VIDEO IN button

Each press of this button cycles through the following input video signal selection options.

•Composite video signal input to the VIDEO IN connectors.

•Component video signals input to the COMPONENT VIDEO Y/R−Y/B−Y IN connectors

•S-video signal input to the S VIDEO IN connector

•SDI video signal input to the SDI INPUT connector

•Video test signal (selected with extended menu item 710) generated by the internal signal generator

In the input selection/audio mode display section, the INPUT VIDEO display shows the selection made with this button.

3CH1, 1/2 (audio channel 1 or 1/2) button

Each press of this button cycles through the following input audio signal selection options for audio channel 1 (when in 2-channel mode) or for audio channels 1 and 2 (when in 4-channel mode).

•Analog audio signal(s) input to the AUDIO IN CH-1 connector (when in 2-channel mode) or AUDIO IN CH-1 and CH-2 connectors (when in 4-channel mode).

•Digital audio signal in AES/EBU format input to the DIGITAL AUDIO (AES/EBU) CH-1/2 connector

•SDI audio signal input to the SDI INPUT connector

•Audio test signal (selected with extended menu item 808) generated by the internal signal generator

In the input selection/audio mode display section, the AUDIO CH1, 1/2 display shows the selection made with this button.

4CH2, 3/4 (audio channel 2 or 3/4) button

Each press of this button cycles through the input audio signal selection options for audio channel 2 (when in 2- channel mode) or for audio channels 3 and 4 (when in 4-channel mode) The input audio signal selection options corresponding to those for the CH1, 1/2 button described above are available.

In the input selection/audio mode display section, the AUDIO CH2, 3/4 display shows the selection made with this button.

5MIXING (mixing setting on/off) button

This enables (ON) or disables (OFF) the setting for audio input mixing made with extended menu item 819.

If the selected signal (except for analog audio) is not supplied to the appropriate connector, the corresponding indicator in the input selection/audio mode display section flashes.

3 Remote control setting section

REMOTE

1REMOTE button

9PIN

29PIN button

i.LINK

3i.LINK button

1REMOTE button

When remote-controlling this unit from the unit connected to the REMOTE-IN, REMOTE-OUT or i.LINK connector, press this button, turning it on.

29PIN button

When carrying out remote control between this unit and the unit connected to the REMOTE-IN or REMOTE-OUT connector, press this button, turning it on.

3i.LINK button

When carrying out remote control between this unit and the unit connected to the i.LINK connector, press this button, turning it on.

16 Chapter 1 Overview