Playback
You can start DMC playback using either the REVIEW button or
PREVIEW button depending on which of the above two methods you use.
Playback and Recording 3 Chapter
REVIEW button
PREVIEW button
To start playback at the
1Press the REVIEW button.
The REVIEW button lights, and the tape is cued up to the
2At the moment the
The REVIEW button lights, and playback starts at normal speed. Between the speed variation start and end points, DMC playback is carried out at the stored speed, and then playback continues at normal speed and the tape stops at the
Starting playback immediately after preroll
Press the PREVIEW button.
The PREVIEW button lights, and after preroll, DMC playback is carried out for the section between the speed variation start and end points, then playback continues at normal speed from the speed variation end point.
Stopping the tape during DMC playback
Press the STOP button.
To exit DMC playback mode
Press the DMC EDIT button and the DELETE button simultaneously.
58 | Chapter 3 Recording and Playback |