Menu items in the 300s, relating to editing operations (continued)

Item number

Item name

Settings

 

 

 

 

 

 

 

 

 

 

318

EDIT RETRY

When editing with two DSR-2000A/2000AP units, select the operation if the recorder

 

 

was not synchronized in time. (Make this setting on the recorder.)

 

 

OFF: Editing is not carried out, and the unit stops.

 

 

 

: The editing is automatically retried (up to twice).

 

 

ON

 

 

 

 

 

 

 

 

 

 

319

PREREAD

Specify the preread editing operation.

 

SELECT

 

 

 

 

 

 

 

 

 

A/V

: Preread for both audio and video.

 

 

 

 

AUDIO: Preread for audio only.

 

 

VIDEO: Preread for video only.

 

 

The preread operation can be controlled with the PREREAD button on the control panel

 

 

or from the 9-pin remote control interface.

 

 

 

 

 

 

 

 

 

326

AUTOMATIC IN

Select whether or not to automatically set the OUT point of the previous edit as the next

 

ENTRY AFTER

IN point at the end of an automatic edit.

 

AUTO EDIT

 

 

 

 

 

 

 

 

 

OFF

: No automatic setting.

 

 

 

 

R: Set recorder IN point automatically.

 

 

R & P: Set recorder IN point automatically, and also player IN point in two-VCR editing.

 

 

 

 

 

 

 

 

 

 

327

AUDIO MODE

Select whether to allow audio data recorded on tape in two-channel mode (or four-

 

CHANGE

channel) to be re-recorded in four-channel (or two-channel mode).

 

 

 

 

: Do not allow re-recording in a different audio mode.

 

 

OFF

 

 

ON: Allow re-recording in a different audio mode.

 

 

When this item is set to ON, the type of editing for audio signals is always a cut editing.

 

 

 

 

335

OUT

When signals are input to both of the REF. VIDEO IN connector and the VIDEO IN

 

REFERENCE

connector, determine which input signal to use as the reference signal.

 

SELECT

 

 

 

 

 

 

 

 

 

REF VIDEO

: Use the signal input to a REF. VIDEO IN connector as the reference video

 

 

 

 

signal.

 

 

 

The input video signal to be edited is required to be in synchronization with the

 

 

reference video signal.

 

 

VIDEO INPUT: Use the input video signal selected with the VIDEO INPUT button in the

 

 

INIPUT SELECT section.

 

 

 

 

 

 

Menu items in the 400s, relating to preroll

 

 

 

 

 

 

Item number

Item name

Settings

 

 

 

 

 

401

FUNCTION MODE

Select the state that the unit goes into after a cuing-up operation.

 

AFTER CUE-UP

 

 

 

 

 

 

 

 

 

STOP

: Stops (the STOP mode).

 

 

 

 

STILL: Still playback (in search mode).

 

 

 

 

 

 

 

 

Note

 

 

When controlling this unit from the BVE-800 editor, set this item to STOP.

 

 

 

 

 

403

AUTOMATIC

Select whether or not the edit IN point is automatically set by pressing the PREROLL

 

PREROLL

button when the IN point is not set before starting preroll.

 

REFERENCE

 

 

 

 

 

 

 

 

 

DIS

: IN point is not set automatically.

 

ENTRY

 

ENA: IN point is set automatically.

 

 

 

 

 

 

 

 

 

 

 

 

Menu Setup 6 Chapter

Chapter 6 Setup Menu 115