8ENTRY/SHIFT button
Use this button for setting edit points, carrying out ClipLink operations, and so forth.
•To set a video IN point or OUT point: Hold down the IN button or OUT button, and press this button.
•To set an audio IN point or OUT point: Hold down the AUDIO IN button or AUDIO OUT button, and press this button.
For more information about ClipLink operation, see Chapter 5 “ClipLink Operation” (page 95).
9IN button and OUT button
To set a video IN point or OUT point, hold down the IN button or OUT button, and press the ENTRY/ SHIFT button.
After you have made the setting, pressing the IN button or OUT button displays the IN point or OUT point on the time counter display.
!º REVIEW button
Use this button to carry out a review of the editing results after carrying out automatic editing.
5 Tape transport control section
1STANDBY button
2PREROLL button
| 3 REC button |
| 4 EDIT button |
STANDBY PREROLL | REC |
EDIT |
5 STOP button
EJECT | REW | PLAY | F FWD | STOP |
9 F FWD button
8PLAY button
7REW button
6EJECT button
1STANDBY button
When a cassette is inserted and this button is off, to put the VCR in standby mode, press the button, turning it on.
In standby mode, the drum is rotating and the tape is in contact with the drum. As a result, recording or playback can start immediately.
To end standby mode, press the STANDBY button, turning it off.
If a certain period of time (value can be varied using extended menu item 501) elapse in standby mode, the unit automatically switches out of standby mode to protect the tape.
2PREROLL button
Press this button to cue up to the preroll point (before the IN point by the time set as the preroll time) on the tape. You can change or select the preroll time and the state of the unit at the end of preroll (stop mode1) or still playback mode) using basic menu item 001 and extended menu item 401.
Cuing up to edit points
Hold down the IN, OUT, AUDIO IN, or AUDIO OUT button while pressing this button to cue up to the corresponding edit point.
3REC (record) button
To start recording, press this button together with the PLAY button, turning it on.
Monitoring in
When the unit is in stop mode, pressing this button lights it, and you can monitor the video and audio in E- E mode. To return to the original state, press the STOP button.
During playback, search, fast forward, or rewind, holding down this button allows you to monitor the video and audio in
Overview 1 Chapter
.........................................................................................................................................................................................
1)Stop mode: the state in which the device currently the subject of operation is stopped, and the STOP button is lit.
Chapter 1 Overview 23