Notes
• You cannot carry out preread editing using SDTI or i.LINK signals.
• When the preread mode is selected (the PREREAD button is lit), to prevent feedback in the loop connection, no E-E video/audio out is available, regardless of the operating mode of the unit. When preread mode is turned off after preread editing, however, if the same channel remains connected to both input and output, an E-E signal is output, and feedback will occur. To prevent this, select PB mode as in step 1 of the following procedure.
• As for a video switcher, use a model that is not provided with a frame memory.
To carry out preread editing, use the following procedure.
2,6 1
| 4Chapter |
1 Press the PB button, turning it on. | Editing |
2Press the PREREAD button, turning it on.
3Make the necessary connections for the preread editing. (See the illustrations on the previous page and on page 128.)
4After selecting the desired insert edit mode, carry out the preread editing.
For details of how to select an edit mode, set edit points, etc., see Chapter 4 “Editing” (page 66).
5When the preread editing is completed, remove the connections.
6Press the PREREAD button, turning it off.
Chapter 4 Editing 87