Location and Function of Parts
Overview 1 Chapter
!¡ VIDEO knob and PRESET/MANUAL switch The switch makes the selection described below. When it is set to MANUAL, you can use the knob to adjust the video signal output level.
PRESET: Regardless of the position of the knob, the video signal output level is set to the reference value.
MANUAL: You can adjust the video signal output level in the range ±3 dB.
You can change the adjustment range using extended menu item 714.
!™ SET UP
PRESET: Regardless of the position of the knob, the
setup level
MANUAL: You can adjust the setup level (DSR- 2000A) in the range ±30 IRE1), or the black level
!£ CHROMA (chrominance) knob and PRESET/
MANUAL switch
The switch makes the selection described below. When it is set to MANUAL, you can use the knob to adjust the chrominance signal output level.
PRESET: Regardless of the position of the knob, the chrominance signal output level is set to the reference value.
MANUAL: You can adjust the chrominance signal output level in the range ±3 dB.
You can change the adjustment range using extended menu item 714.
!¢ Y/C DELAY knob and PRESET/MANUAL switch
The switch makes the selection described below. When it is set to MANUAL, you can use the knob to adjust the Y/C delay.
PRESET: Regardless of the position of the knob, the Y/C delay is set to the reference value.
MANUAL: You can adjust the Y/C delay in the range ±100 ns.
!∞ CHROMA PHASE (HUE)
CHROMA PHASE
The switch makes the selection described below. When it is set to MANUAL, you can use the knob to adjust the hue/chrominance phase (the phase difference from a burst signal).
PRESET: Regardless of the position of the knob, the hue/chrominance phase is set to the reference value.
MANUAL: You can adjust the hue/chrominance phase in the range ±30°.
!§ SYNC knob
This adjusts the output signal sync phase with respect
to the input reference signal to this unit in the range ±3 ∝s.
Use this adjustment when the output phase of this unit is not accurately aligned with the reference signal phase, or when carrying out special effects editing with this unit and other VCRs connected to a switcher or other equipment.
!¶ SC (subcarrier) knob
This adjusts the output signal subcarrier phase with respect to the input reference signal to this unit in the range ±180°.
For editing with composite signals, use this adjustment when the output phase of this unit with respect to the phase of the reference signal is not accurately aligned with the subcarrier phase.
Note
The color of video on monitors connected to the composite and
.........................................................................................................................................................................................
1) IRE: A unit for representing a video level laid down by | the IEEE (Institute of Electrical and Electronic |
the IRE (Institute of Radio Engineers). The IRE is now | Engineers). |
28 Chapter 1 Overview