Playback and Recording 3 Chapter

Digitally Dubbing Signals in DVCAM Format

6Press the SET button.

The recording tape and source tape are both automatically wound back to the beginning, and dubbing starts. At the same time, the screen changes as follows.

SDTI DUBBING (A/V/TC/CM)

EXECUTING.

TCR 00:00:00:00

UBR 00:00:00:00

ABORT:MENU KEY

To end the dubbing operation while it is in progress

Press the STOP button.

The dubbing operation stops and a message asking whether to copy the contents of the cassette memory appears.

For more information about this, see the section “If you end dubbing while it is in progress” (page 65).

When dubbing is completed

1A message “COMPLETED” appears on the monitor.

2The source tape and recording tape are both automatically rewound to the beginning, and the cassettes ejected.

3The unit returns to the state in step 4.

7To continue by dubbing another tape, repeat steps 5 and 6.

8To end the dubbing operation and exit from the menu, press the MENU button.

64

Chapter 3 Recording and Playback