Automatic Editing
To preroll
Use the following procedure.
Editing 4 Chapter
2 1
1Press the RECORDER button or PLAYER button to select the VCR on which you wish to carry out a preroll.
The button you have pressed lights.
2Press the PREROLL button.
The tape is wound back to a position 5 seconds (factory default setting) before the edit IN point, and stops.
To change the preroll time
The factory default setting for the preroll time is 5 seconds, but you can use basic menu item 001 to change this to any value from 0 to 30 seconds. If you change the preroll time, make sure that the setting is not longer than the recording length before the edit IN point.
Note that for automatic editing, the preroll time setting on the recorder takes precedence.
78 Chapter 4 Editing