Notes on video output to the monitor

In E-E mode, the video output of the unit is delayed by the time for video circuit processing with respect to the input video signal (8H).

Unlike the playback operations described in Chapter 3, for playback to be carried out in edit mode with both the player and recorder specified, you can use extended menu item 701 to delay the V-SYNC phase by 8H.

Button/Switch Settings for Editing

Before beginning editing, set buttons and switches on the recorder and player as follows.

For details of the settings of each of the buttons/switches, see the pages indicated in parenthesis.

Recorder settings

MONITOR SELECT buttons (page 18): select the audio channels to be monitored.

POWER switch: I side

REC controls (page 17): adjust the audio recording levels.

Input selection section (page 15): select the input video and audio signals.

REMOTE button (page 16): unlit 9PIN (when using REMOTE-IN/-OUT) or i.LINK (when using i.LINK) button: lit

COUNTER SEL button (page 19): select the data to be displayed (counter value or time code value)

REC INHIBIT switch (page 27): OFF

Editing 4 Chapter

TC SELECT switch (page 27): TC or VITC, when displaying time code

INT/EXT–PRESET/REGEN switch (page 27): select the time code to be recorded.

Chapter 4 Editing 69