Sony PEG-N770C/E Application Launcher screen, To perform a HotSync operation, proceed as follows

Using your CLIÉ handheld			n N
Instructions			81
		the Application Launcher screen.
	To perform a HotSync® operation, proceed as follows:
	1	Rotate the Jog Dial™ to select HotSync® and then press the Jog Dial™. Or tap the HotSync®		icon on
Operating		The HotSync dialog box appears.
	2	Tap Local.
	3	Tap the arrow beneath the HotSync® icon and then select IR to a PC/Handheld from the drop-down
CLIE		list.
	4	Point the IR port of your CLIÉ handheld directly at the IR port of the receiving computer.
		For best results, your computer and your CLIÉ handheld should be 4 to 8 inches (approximately 10 to 20
		centimeters) apart, and the path between your CLIÉ handheld and the computer must be clear of
		obstacles.

5 Tap the icon.

The HotSync® operation starts. Wait for the message showing that the HotSync® operation is complete.

Restoring the local HotSync® settings

To restore the local HotSync® settings, proceed as follows:

1Connect the cradle to your computer.

2 Click the HotSync® icon in the Windows® system tray and deselect the check mark of Local from the shortcut menu.

3 Click the HotSync® icon in the Windows® system tray again and then select Setup from the Shortcut menu.

The Setup dialog box is displayed.

4Click the Local tab to display the setting for a local HotSync® operation as needed.

5Click OK.

Your computer is now ready to perform a local HotSync® operation.