CLIE Operating Instru ctions
Using your CLIÉ handheld
82
nN
Conducting a HotSync® operation via a networkWhen you use the Network HotSync® application, you can take advantage of the LAN and WAN connectivity
available in many office environments. The Network HotSync® application enables you to perform a
HotSync® operation by dialing in to a network or by using a cradle th at is connected to any computer on
your LAN or WAN (provided that the computer connected to the cradle al so has the Network HotSync®
application installed, your computer is on, and the HotSync® Manager is running).
Connecting to your company' s dial-in server
The Network HotSync® application requires the following:
Your computer has TCP/IP support installed.
Both your company’s network system and its remote access server suppo rt TCP/IP.
You have a remote access account.
Everything you need to connect to your company’s dial-in server (network modem) is included in the
Palm™ Desktop for CLIÉ software and your CLIÉ handheld. You need to activate certain features,
however, on both the Palm™ Desktop for CLIÉ software and your CLIÉ h andheld.
Preparing your computer
To prepare your computer, proceed as follows:
1Click the HotSync® icon in the Wind ows® system tray and then select Network from the Sho rtcut
menu.
2Click the HotSync® icon in the Windows® system tray again and then select Setup from the Shortcut
menu.
The Setup dialog box is displayed.
3Click the Network tab and mak e sure your user n ame has a check ma rk selected next to it. If the check
mark is not there, select the check box next to your user name.
4Click OK.