nTier700 BlueScale Firmware
Updating Firmware
Note: Until further notice, firmware updates for the nTier700 are currently managed on an individual basis by Spectra Logic Technical Support. Contact Spectra Logic Technical Support for assistance (see Contacting Spectra Logic on page 4).
To ensure that you have the most current firmware for your nTier700:
1.Connect to the BlueScale web interface.
2.Select About on the menu bar to check the currently installed BlueScale firmware version.
3.If the version you have is older than the most current version described in these release notes, contact Spectra Logic Technical Support to obtain an update.
4.If a more current firmware version is available, download the update and install it. Refer to the current version of the Spectra nTier700 Backup and Archive Appliance User Guide for instructions.
Note: A current support contract is required before you can download firmware updates.
Contact Spectra Logic Technical Support at www.spectralogic.com/support if you have any questions.
Firmware Version Requirements
Important The update to BlueScale 2.6.0.6 or later from any earlier version of the BlueScale firmware must be performed by Spectra Logic Technical Support personnel (see
Contacting Spectra Logic on page 4).
FIRMWARE PACKAGE HISTORY
The following sections list information about the BlueScale firmware packages and how they affect the nTier700 and its components. The BlueScale firmware releases are listed in reverse chronological order, with the most recent release listed first. All package names are followed with the date of release (YYYYMMDD).
Important Unless otherwise stated, the known issues remain active until moved to the resolved issues section. Always read the known issues section for each firmware
release to make sure you are aware of any potential problems.
12
Release Notes | 90990019 |
