Updates to the User Guide
If you do not want to install ActiveX on the system, you can access the Windows operating system directly using a keyboard, mouse, and monitor connected directly to the nTier700 application server (see Figure 1 on page 31 for the connector locations). Log in using the same user name and password that you use to connect to the BlueScale web interface.
Note: Using a USB keyboard and mouse lets you connect these devices without
Connect and Log In
Use the following steps to access the Windows desktop.
Note: If you are accessing Windows using a direct connection to the nTier700 application server, skip to Step 3 on page 47 to log in.
1.Log into the BlueScale web interface (see Access the BlueScale Web Interface on page 40).
2.Select General > Windows Desktop. The Windows Desktop screen displays.
Figure 14 The Windows Desktop message.
Note: If you attempt to connect to the remote desktop using Firefox, you will receive a notification that you must using Internet Explorer.
46
Release Notes | 90990009 |
