3 / Making Calls
2.Off-Hook Voice Announce (OHVA)
Use the OHVA feature when you want to interrupt a busy extension. To be able to perform an OHVA the called party must meet the following criteria:
1.The called extension must be an Executive or Executive Data keyset.
2.The called party must be using the handset. Your OHVA call will be con- nected through the speakerphone.
3.The called party’s keyset must be programmed to permit OHVA calls. Your system administrator can advise if this is the case.
OHVA is programmed at the system level to connect immediately or after a specified period of time. This gives the called party time to reject the call before being interrupted.
Note, therefore, that the called party may reject your OHVA. If this occurs, you will receive an error tone.
If you attempt to place an OHVA call to a Business keyset or a plain single line telephone, you will receive an error tone.
x | x | x |
0
Placing an OHVA call
1.Dial the extension number.
2.Receive busy tone.
3.Dial 0.
4.You are connected through the speaker of the called party.
Protegé® Keyset User Guide - without display | 21 |
