31

Protegé
®Keyset User Guide - without display

System Hold

Placing a trunk call on system hold
1. Keyset is in use on an active call.
2.Press the Hold key.
Retrieve
1. Press held outside line key (flashing green).
- or -
Press the Function key and then dial 7 [.
1. Hold
You can place a trunk call on one of two types of hold; System or Exclusive.
A trunk call placed on System Hold is held at the system level. Any extension
keyset can retrieve the call.
A trunk call placed on Exclusive Hold is held specifically at your station. At
other extensions that held trunk will still appear busy. This prevents any other
extension from inadvertently picking up that call and gives you a certain level
of privacy on trunk calls. Calls placed on Exclusive Hold can be retrieved from
a different extension by using the Directed Call Pickup feature. After a time
period, a call placed on Exclusive Hold will revert to System Hold status.
You can place several different calls on both types of hold. Use the Hold
Retrieve function code to retrieve successive held calls. Calls are retrieved in
the order in which they were placed on hold; the first call held is the first one
retrieved.
The Protegé phone system generates a periodic tone over your keyset’s speaker
to remind you of a call you have placed on hold.
If you enable Automatic Hold on your keyset you can skate from one call to
another, automatically placing the first call on exclusive hold. This method
shortens the transfer process by allowing you to transfer an active trunk call to
another extension via a preprogrammed DSS key without first pressing the
Hold key.
7[[
FUNCTION
HOLD
chapter
fourCall Handling