
Chapter 1 Setting up your printer
Your printer is a reliable and quality precisioned instrument. It is every owner's respon- sibility to make sure that their equipment is properly placed and sensibly used. If the following conditions are met, you can expect your printer to perform at its finest and to last a long time.
Unpacking and checking the package contents
When you open the box, you will find the | 1 | 2 | |
items in the list below included. Remove all | |||
| |||
|
| ||
of the packing materials. Check to make sure, |
|
| |
when removing the contents of the carton, that |
|
| |
each item has been included. There should |
| 3 | |
be a total of five items. If you are missing |
| ||
|
| ||
any of them, contact your dealer immediately. |
|
|
Package contents
4
1 WinType 4000 laser printer
2 This Users Manual
5
3 Power cable
4 Printer driver and font software (3 disks) 5 Starter high definition EP toner cartridge
We strongly recommend that you save the box and all of the packing materials for this printer. They will protect the printer should you ever need to transport it to a new location.
Caution: Always remove the EP toner cartridge prior to transporting this printer. Failure to do so may result in permanent damage to your printer and may void your warranty.
Placing the printer
If you take good care of your printer, you can expect it to perform at its finest and to last for a very long time. You can do that by first setting your printer in an area which meets the following requirements.
•A firm, level surface which is free from vibration.
•An area free from excessive heat such as direct sunlight or heaters.
•A dust free environment.
•A steady power supply. Do not connect it to an outlet which uses the same circuit as a refrigerator or an air conditioner.
•Use only the line voltage specified on the identification plate.
1