3.Follow the instructions for setting up your default printer.

4.Select the HP LaserJet IIP driver in your DOS application. Refer to your DOS application's Users Manual for details on selecting a printer.

5.Select the command to print.

• .PIF File Method

1.Double-click on your .PIF DOS applica- tion icon. This icon was either created by you or supplied to you by your applica- tion program.

2.Follow steps 2 - 5 from the DOS prompt method described above.

Note: When you are finished with your DOS application, you must type Exit at the command line prompt (eg. C>) to return to Windows.

Note: The WinType 4000 is a Windows printer. The Window's Direct (GDI) mode is based on Windows 3.1 and will not work with MS-DOS. However, the WinType 4000 will work in PCL mode if you launch an MS-DOS application from within Windows.

The WinType 4000 will not run properly if you exit Windows completely.

38

Page 48
Image 48
Star Micronics 4000 user manual