Star Micronics 4000 Printing DOS applications in PostScript mode under Windows, DOS Prompt Method

Printing DOS applications in PostScript mode under Windows

To print your DOS applications while running under Windows, please follow the steps explained below.

Steps:

1.Select and setup the Star WinType PostScript driver by following steps 1-9 explained on pages 32 - 33.

2.Launch your DOS application by using one of the following methods.

•DOS Prompt Method

1.Double-click on the MS-DOSprompt icon from the Main Group in the Windows Program Manager.

2.Begin the DOS application as normal ac- cording to your application's user manual.

3.Follow the instructions for setting up your default printer.

4. Select either PostScript® printer or Apple LaserWriter Plus in your DOS application. Refer to your DOS application's Users Manual for details on selecting a printer.

5. Select the command to print.

•.PIF File Method

1.Double-click on your .PIF DOS applica- tion icon. This icon was either created by you or supplied to you by your applica- tion program.

2.Follow steps 2-5 from the DOS prompt method described above.

Note: When you are finished with your DOS application, you must type Exit at the command line prompt (eg. C:>) to return to Windows.

35