Please note: Parameters 5 and 6 will only be displayed when a mixer and or a printer is configured.
Step 5:
•Press 
again and the symbol “s” will light up and the number “5” will be displayed if you have a blending unit and have invoked this option.
•After “5” flashes on the display, a number in the format xxx.xx will come up on the display.
•Enter the maintained running time of the blending unit in seconds using the arrow keys. This is how long the blender will run after each dosing cycle and should be adjusted for the best possible blend. Too little time may not produce good dispersion; too much time can cause separation, especially with heavy concentrates.
Step 6:
•Press 
again. This will activate the printing option if it is available and the number “6” will be displayed.
•After the “6” flashes on the screen, a number in the format xxx.xx will come up on the display.
•By using the arrow keys, you can choose your printer parameters. If you have not activated this option, skip to the next step.
Digital Dosing Units | 36 |
