Step 4:
•Press and hold 
until the totalizer appears on the screen.
•The recipe is now active and can be run or edited.
NOTE: The recalled recipe now becomes the active recipe.
4.2Clearing the Totalizer
•The totalizer displays the total amount of additive dosed since the last time the totalizer was cleared.
•The totalizer can be cleared by pressing Stop 
continuously for 5 seconds until the display is reset to “00.00.” The totalizer can be configured to read throughput in grams or pounds.
•See Appendix A to learn how to change the unit of measure.
4.3Acknowledging Alarms
•When an alarm occurs, the Alarm symbol 
flashes red and the dosing process stops.
•If the Digital Dosing is equipped with an audible alarm or flashing light, it will also be activated.
•Alarms are acknowledged by pressing 
.
•The alarm will also initiate an error code.
•See Appendix A for Troubleshooting suggestions for various alarms.
•The alarm condition must be corrected prior to beginning operation again.
Digital Dosing Units | 43 |
