Sterling Plumbing 882 00276.00 Recipe Setup for Injection Molding, DD Discs Calibration Number

Recipe Setup for Injection Molding:

1.Turn power switch to ON position.

2.Press Input to display # 1, “Additive %”. Using arrow keys, set additive ratio.

3.Press Input to display #2, “Shot size of current mold”. Using arrow keys, set the total shot size (parts and runners) of the current mold capacity in grams/pounds.

4.Press Input to display # 3, “Screw recovery time”. Using arrow keys, set the screw recovery time (in seconds).

5.Press Input to display # 4, “Calibration weight for additive”. Enter the appropriate value from the range table below and proceed to calibration mode below for calibration of additive material.

DD Discs

		Disc		Calibration Number
				Range
		DD 30-030672	1.75
		DD 30-051040	5.00
		DD 30-051725	8.00
		DD 30-051818	15.00
DT Discs
Disc	Calibration Number
	Range
DT 30-101820	32.00
DT 30-102025	38.00		DP Discs
DT 30-203012	100.00
				Disc	Calibration Number
DT 30-204010	175.00					Range
				DP 30-050940	17.00
				DP 30-250940	8.00

Digital Dosing Units 9