22 Netra 440 Server System Administration Guide • August 2004
d. Power on the system.
Refer to the Netra 440 Server Installation Guide for power-on procedures.
Continue with your installation or diagnostic test session as appropriate. When you
are finished, end your session by typing the terminal server’s escape sequence and
exit the window.
For more information about connecting to and using the ALOM system controller,
refer to the Advanced Lights Out Manager User’s Guide.
If you have redirected the system console to ttyb and want to change the system
console settings back to use the serial management and network management ports,
see “System Console OpenBoot Configuration Variable Settings” on page 31.
Accessing the System Console Through a TIP Connection
This procedure assumes that you are accessing the Netra 440 server system console
by connecting the serial port of another Sun system to the serial management port
(SERIAL MGT) of the Netra 440 server (FIGURE 1-6).
FIGURE 1-6 TIP Connection Between a Netra 440 Server and Another Sun System
Another Sun system
TIP connection
Serial port
Serial management port