Sun Microsystems 440 manual To determine full physical device paths, type

TABLE 2-2

where the device-identifieris one of the following:

■

■

■

Any full physical device path, as reported by the OpenBoot show-devscommand

Any valid device alias, as reported by the OpenBoot devalias command Any device identifier from

Note – The device identifiers are not case sensitive. You can type them as uppercase or lowercase characters.

TABLE 2-2Device Identifiers and Devices

Device Identifiers	Devices
cpu0-bank0,cpu0-bank1,cpu0-bank2,cpu0-bank3, ...cpu3-	Memory banks 0–3 for each CPU
bank0, cpu3-bank1,cpu3-bank2,cpu3-bank3
cpu0-bank*,cpu1-bank*, ...cpu3-bank*	All memory banks for each CPU
ob-ide	On-board IDE controller
ob-net0,ob-net1	On-board Ethernet controllers
ob-scsi	On-board Ultra-4 SCSI controller
pci-slot0,pci-slot1, ...pci-slot5	PCI slots 0–5
pci-slot*	All PCI slots
pci*	All on-board PCI devices (on-board
	Ethernet, Ultra-4 SCSI) and all PCI slots
hba8, hba9	PCI bridge chips 0 and 1, respectively
ob-usb0, ob-usb1	USB devices
*	All devices

■To determine full physical device paths, type:

ok show-devs

The show-devscommand lists the system devices and displays the full path name of each device.

■To display a list of current device aliases, type:

ok devalias

Chapter 2 Managing RAS Features and System Firmware 47