Sun Microsystems 440 manual Appendix a OpenBoot Configuration Variables

TABLE A-1OpenBoot Configuration Variables Stored on the System Configuration Card (Continued)

Variable	Possible Values	Default Value	Description
nvramrc	variable_name	none	Command script to execute if
			use-nvramrc? is true.
security-mode	none, command,	none	Firmware security level.
	full
security-password	variable_name	none	Firmware security password if
			security-mode is not none (never
			displayed) - do not set this directly.
security-#badlogins	variable_name	none	Number of incorrect security password
			attempts.
post-trigger	error-reset,	power-on-reset	Sets trigger events that will cause POST to
	power-on-		run, provided diag-switch?is true.
	reset,		POST does not run if diag-switch?is
	user-reset,		false, regardless of the post-trigger
	all-resets		setting.
diag-script	all, normal,	normal	Specifies the set of tests for OpenBoot
	none		Diagnostics to run. Selecting all is
			equivalent to running test-allfrom the
			OpenBoot command line.
diag-level	none, min, max	min	Defines how diagnostic tests are run.
diag-switch?	true, false	false	If true:
			• Run in diagnostic mode
			• After a boot request, boot diag-file
			from diag-device
			If false:
			• Run in nondiagnostic mode
			• After a boot request, boot boot-file
			from boot-device
obdiag-trigger	error-reset,	error-reset	Sets trigger events that cause OpenBoot
	power-on-		Diagnostics to run, provided diag-
	reset,		switch? is true, and diag-script is
	user-reset,		not none.
	all-resets		OpenBoot Diagnostics does not run if
			diag-switch? is false or if
			diag-scriptis none, regardless of the
			obdiag-trigger setting.
error-reset-recovery	boot, sync,	boot	Command to execute following a system
	none		reset generated by an error.

Appendix A OpenBoot Configuration Variables 69