Sun Microsystems 440 To View Environmental Information

36 Netra 440 Server System Administration Guide • August 2004

Note – Do not use the scadm utility while SunVTS™ diagnostics are running. See

your SunVTS documentation for more information.

You must be logged in to the system as root to use the scadm utility. The scadm

utility uses the following syntax:

The scadm utility sends its output to stdout. You can also use scadm in scripts to

manage and configure ALOM from the host system.

For more information about the scadm utility, refer to the following:

■scadm man page

■Advanced Lights Out Manager User’s Guide (817-5481-xx)

▼ To View Environmental Information

1. Log in to the ALOM system controller.

2. Use the showenvironment command to display a snapshot of the server’s

environmental status.

# scadm command

sc> showenvironment

=============== Environmental Status ===============

------------------------------------------------------------------------------

System Temperatures (Temperatures in Celsius):

------------------------------------------------------------------------------

Sensor Status Temp LowHard LowSoft LowWarn HighWarn HighSoft HighHard

------------------------------------------------------------------------------

C0.P0.T_CORE OK 48 -20 -10 0 97 102 120

C1.P0.T_CORE OK 53 -20 -10 0 97 102 120

C2.P0.T_CORE OK 49 -20 -10 0 97 102 120

C3.P0.T_CORE OK 57 -20 -10 0 97 102 120

C0.T_AMB OK 28 -20 -10 0 70 82 87

C1.T_AMB OK 33 -20 -10 0 70 82 87

C2.T_AMB OK 27 -20 -10 0 70 82 87

C3.T_AMB OK 28 -20 -10 0 70 82 87

MB.T_AMB OK 32 -18 -10 0 65 75 85

...

Contents

Main Page Contents Page Page Page Figures Page Tables Page Preface How This Book Is Organized Using UNIX Commands Shell Prompts Typographic Conventions Related Documentation AaBbCc123 Page Configuring the System Console Communicating With the System Page What the System Console Does Using the System Console Default System Console Connection Through the Serial Management and Network Management Ports Page Alternative System Console Configuration Accessing the System Console Through a Graphics Monitor Note About the sc> Prompt Note Access Through Multiple Controller Sessions Reaching the sc> Prompt OpenBoot ok Prompt Reaching the ok Prompt Graceful Shutdown ALOM System Controller break or console Command L1-A (Stop-A) Keys or Break Key Note Externally Initiated Reset (XIR) Caution Manual System Reset Caution Getting to the ok Prompt Caution To Get to the ok Prompt Switching Between the ALOM System Controller and the System Console Note Accessing the System Controller Using the Serial Management Port To Use the Serial Management Port Activating the Network Management Port Note To Activate the Network Management Port Accessing the System Console Through a Terminal Server To Access The System Console Through a Terminal Server Page Note Accessing the System Console Through a TIP Connection To Access the System Console Through the TIP Connection Note Modifying the /etc/remote File To Modify the /etc/remote File Note Accessing the System Console Through an Alphanumeric Terminal To Access the System Console Through an Alphanumeric Terminal Note Verifying Serial Port Settings on TTYB Note To Verify the Serial Port Settings on TTYB Accessing the System Console Through a Local Graphics Monitor To Access the System Console Through a Local Graphics Monitor Page System Console OpenBoot Configuration Variable Settings Page Managing RAS Features and System Firmware Note ALOM System Controller Note Logging In To the ALOM System Controller Note To Log In To the ALOM System Controller About the scadm Utility Note To View Environmental Information Note Controlling the Locator LED Note OpenBoot Emergency Procedures OpenBoot Emergency Procedures for Systems With Non-USB Keyboards OpenBoot Emergency Procedures for Systems With USB Keyboards Stop-A Functionality Stop-N Functionality To Restore OpenBoot Configuration Defaults Stop-F Functionality Automatic System Recovery Note Auto-Boot Options Note Error Handling Summary Note Reset Scenarios Automatic System Recovery User Commands Enabling and Disabling Automatic System Recovery To Enable Automatic System Recovery Note To Disable Automatic System Recovery Note Obtaining Automatic System Recovery Information Unconfiguring and Reconfiguring Devices To Unconfigure a Device Manually Page Note To Reconfigure a Device Manually Note Enabling the Hardware Watchdog Mechanism and Its Options To Enable the Hardware Watchdog Mechanism Multipathing Software Managing Disk Volumes Disk Volumes Volume Management Software VERITAS Dynamic Multipathing Sun StorEdge Traffic Manager Note RAID Technology Disk Concatenation RAID 0: Disk Striping RAID 1: Disk Mirroring RAID 5: Disk Striping With Parity Hot-Spares Hardware Disk Mirroring Caution Physical Disk Slot Numbers, Physical Device Names, and Logical Device Names To Create a Hardware Disk Mirror Page To Delete a Hardware Disk Mirror Page To Perform a Mirrored Disk Hot-Plug Operation Caution Note To Perform a Non-Mirrored Disk Hot-Swap Operation Page Page Page Note that c1t3d0 is now listed as configured. OpenBoot Configuration Variables Page Page Page Alarm Relay Output Application Programming Interface Page Page Page Page Page Index SYMBOLS A B C D E F G H L M N O P R S T U V X