Sun Microsystems 440 manual Baudrate, bits

TABLE A-1OpenBoot Configuration Variables Stored on the System Configuration Card (Continued)

Variable	Possible Values	Default Value	Description
ttyb-rts-dtr-off	true, false	false	If true, operating system does not assert
			rts (request-to-send) and dtr
			(data-transfer-ready) on ttyb.
ttyb-ignore-cd	true, false	true	If true, operating system ignores carrier-
			detect on ttyb.
ttya-rts-dtr-off	true, false	false	If true, operating system does not assert
			rts (request-to-send) and dtr
			(data-transfer-ready) on serial management
			port.
ttya-ignore-cd	true, false	true	If true, operating system ignores carrier-
			detect on serial management port.
ttyb-mode	baud_rate, bits,	9600,8,n,1,-	ttyb (baud rate, number of bits, parity,
	parity, stop,		number of stops, handshake).
	handshake
ttya-mode	9600,8,n,1,-	9600,8,n,1,-	Serial management port (baud rate, bits,
			parity, stop, handshake). The serial
			management port only works at the default
			values.
output-device	ttya, ttyb,	ttya	Power-on output device.
	screen
input-device	ttya, ttyb,	ttya	Power-on input device.
	keyboard
auto-boot-on-error?	true, false	false	If true, boot automatically after system
			error.
load-base	0-n	16384	Address.
auto-boot?	true, false	true	If true, boot automatically after power on
			or reset.
boot-command	variable name	boot	Action following a boot command.
diag-file	variable name	none	File from which to boot if diag-switch?
			is true.
diag-device	variable name	net	Device from which to boot if
			diag-switch? is true.
boot-file	variable name	none	File from which to boot if diag-switch?
			is false.
boot-device	variable name	disk net	Device(s) from which to boot if
			diag-switch? is false.
use-nvramrc?	true, false	false	If true, execute commands in NVRAMRC
			during server startup.

68 Netra 440 Server System Administration Guide • August 2004