To create your own device alias for a physical device, type:

ok devalias alias-name physical-device-path

where alias-nameis the alias that you want to assign, and physical-device-pathis the full physical device path for the device.

Note – If you manually disable a device using asr-disable, and then assign a different alias to the device, the device remains disabled even though the device alias has changed.

2.To cause the parameter change to take effect, type:

ok reset-all

The system permanently stores the parameter change.

Note – To store parameter changes, you can also power cycle the system using the front panel Power button.

To Reconfigure a Device Manually

1.At the ok prompt, type:

ok asr-enabledevice-identifier

where the device-identifieris one of the following:

Any full physical device path, as reported by the OpenBoot show-devscommand

Any valid device alias, as reported by the OpenBoot devalias command

Any device identifier from TABLE 2-2

Note – The device identifiers are not case sensitive. You can type them as uppercase or lowercase characters.

You can use the OpenBoot asr-enablecommand to reconfigure any device that you previously unconfigured with the asr-disablecommand.

48 Netra 440 Server System Administration Guide • August 2004

Page 62
Image 62
Sun Microsystems 440 manual To Reconfigure a Device Manually, To cause the parameter change to take effect, type