NETWORKING GUIDE

SVAT ELECTRONICS

now you can see

Install the ActiveX controls and Microsoft Visual C++ 2005 SP1

After typing the IP address into the Internet Explorer address bar and pressing ENTER:

1.There will be a yellow information bar that pops up below the address bar in Internet Explorer. Click on the yellow information bar and then select “Install ActiveX control”. Please be patient as the installation process can take 1-2 minutes.

2.Read the terms of the License agreement and press “YES” to continue with the installation.

3.After the Microsoft Visual C++ 2005 SP1 has been installed, you will be prompted to install the CMSPlugin.cab software. This is required to view and control the DVR. Select “INSTALL” to begin the installation.

4.Once the ActiveX control and Microsoft C++ 2005 PS1 have been installed, you will be prompted to type in a username and password. This is the same username and password that is used to access the menu system of the DVR. By default the username is “aa” and the password is “11”. Follow any instructions on screen and then log into the DVR by using a proper username and password.

CLEARVU11

42

 

 

Page 45
Image 45
SVAT Electronics CLEARVU11 instruction manual Networking Guide