SVAT Electronics CLEARVU11 instruction manual Main Menu, SETUP Administrator mode only, Notes

MAIN MENU	SVAT ELECTRONICS
	now you can see

NOTES:

1.DO NOT format the DVD disc for better performance and compatibility.

2.Before using USB pen drive, please format it to FAT32 file system by Windows XP or higher.

3.The backup device has to be connected by the system software before it can be used to read/write.

4.Some backup devices may have compatibility problems. Please contact Customer Support at 1-866-946- 7828 for any issues you may have.

5.Please DO NOT unplug the backup device when it’s connected, or the system may act abnormally or even shut down. Always disconnect the device from the backup device menu before removing it.

•Backup - Press ENTER when this item is selected to backup the configurations of this unit to the corresponding device. This will be used to restore your configuration settings at a later time.

•Restore - Press ENTER when this item is selected to restore the configuration settings from the corresponding backup device to this DVR.

Tested USB 2.0 Drives (the DVR is not limited to only these devices)

•Macpower’s Alumni Prefect USB 2.0 - PF-U2MS

•Transcend’s JetFlash 150/V60 Series

•Apacer’s Handy Steno AH220

•Pretec’s i-Disk Wave 512M-Black

•Kingston’s DataTraveler USB Flash Drive

•SanDisk’s Cruzer micro USB Flash Drive

•Sony’s MICRO VAULT Classic Series

NOTE: The DVR is not limited to only these backup devices. Other backup devices may work normally.

SETUP (Administrator mode only)

In Menu display, press ▲▼ to change the highlighted option to Setup, and then press ENTER to call up Setup Menu display as shown.

To enter the Setup Menu display of the system, you must be logged in as an administrator.

CLEARVU11 16