SEARCH MENU
SEARCH BY EVENT
SVAT ELECTRONICS
now you can see
The screen for Search By Event - Log display, is shown below:
There are four different types of event logs, including Alarm, Motion, Video Loss, and System. Up to 1000 of the most recent event logs can be stored in the system.
The general operations are as below:
•▲▼◄►- Press these buttons to select the items.
•ESC (MENU/ESC) - Press this button to escape from this screen, and return to
•MODE- Refresh - Press this button to refresh the log display. If there are new event logs after the screen is last updated, the log list shown will be updated accordingly.
•SEQ - Page Up
•X2 - Page Down - Press SEQ/X2 to Page Up/Down the Log display.
•Numeric (ENTER) - Press these buttons to select the display page of the event logs, the log list will also be updated. (Please note that only 1/2/3/4 are available when using the keypad on the front panel.)
Following is a brief description for each item and its specific operations:
•Event Type – allows you to choose the type of the events (Record, Alarm, Motion, Video Loss, System) to be shown in the log list. The Event Type “System” includes all system related events, such as power on/off, and will not trigger recording. Press ENTER or +/- to check/uncheck the event type for the log list.
•Source ID – reveals the source which triggered the event. It’s used to filter the events to be shown in the log list. For Alarm, it’s the alarm input number; for Motion and Video Loss, it’s the camera number. Press ENTER or +/- to check/uncheck each item.
•Log List – the event logs according to the Event Type and Source ID selected.
The user may:
(1)press ENTER to enter Event Playback display of the selected event log in this list,
(2)press Play Button (► ) to playback directly, or
(3)press Copy Button (
) to backup (copy) the selected recorded video/audio to the connected backup device without playback.
CLEARVU11 | 55 |
|
|
