SVAT Electronics CLEARVU11 instruction manual Main Menu, The general operations are as below

MAIN MENU

SVAT ELECTRONICS

now you can see

•Detection Settings - Calls up a grid system used for masking areas of the camera’s view. Fully explained on the next page.

•Buzzer – this option allows you to choose to activate the internal buzzer (or not) when motion of this camera is detected. Press ENTER or +/- to check/uncheck this item. The default setting is “” - checked

•Log – this option allows you to choose to log your events. Press ENTER or +/- to check/uncheck this item. The default setting is “” - checked.

•Screen Message – to display the event message on the screen or not. Press ENTER or +/- to check/uncheck this item. The default setting is “” - checked.

•E-mail– to send the event e-mail to a pre-determined email or not. The e-mail will be sent to the predefined receivers when the event is triggered. Press ENTER or +/- to check/uncheck this item. The default setting is “–” - unchecked.

The general operations are as below:

•▲▼-- Press these buttons to select the items.

•Numeric (CH1-CH4) - Press these buttons to select the camera.

•COPY ( ) - Press this button to copy the Motion settings, including Detection settings, of the focus camera to all the following cameras. (E.g. focus camera is 1, its Motion settings will be copied to those of cameras 2-4.)

•ESC (MENU/ESC) - Press this button to escape from this screen, and return to Camera Setup display. If the Save dialog is shown, press ENTER to exit and save, ESC (MENU/ESC) to exit without saving.

CLEARVU11 21