BASIC SETUP
POWERING THE SYSTEM
SVAT ELECTRONICS
now you can see
1.Insert the power supply wire into the rear DC 12V Port on the LCD/DVR.
4.Plug the power cord into a power outlet.
2.Plug the mouse into the PS2 port at the back of the LCD/DVR (recommended).
5.Turn on the master switch on the back right of the system.
3.Insert the power cord into the power supply.
6.Press POWER on the top panel of the system if it doesn’t start after turning on the master switch.
NOTE: We recommend using a surge protected power bar and/or Uninterrupted Power Supply (UPS) backup to prevent damage to your DVR system.
CLEARVU11 | 8 |
|
|
