TD7010K0_2000942950_mix cuis 23/12/11 11:17 Page29
FR NL DE IT EN ES PT EL TR RU UK CS SK HU BG RO HR SV FI DA NO KZ
Operation
POSITIONING THE LID
To lock the lid, place it on the bowl making sure to align the markers, and turn towards the left - fig . 4/5 
Note: the lid cannot be removed once the bowl is locked onto the body of the appliance.
POSITIONING THE BOWL
Once the lid is locked on, place the bowl on the body of the appliance and turn it until it locks into position - fig. 6/7.
Note: the appliance will not work if the bowl is not properly locked in position.
USING THE STEAMING FUNCTION
Open the plug on the water tank and pour in the amount of water indicated for cooking the food using the water measure - fig. 8. Put the plug back in. Place the food
in the steaming basket then place the basket in the bowl, in the notch designed for this purpose - fig. 9. Close the lid, making sure it is locked in position - fig. 4/5.
Then place the bowl on the body of the appliance - fig. 6/7 and turn the button to the steaming position .
The indicator light comes on and the button returns to the position. 
The appliance starts to heat up and stops automatically when the water tank is empty. Caution: on first use, the steam function may already be selected. Thus, the tank must always be filled before you plug in the appliance.
STEAMING
Cooking time varies according to the temperature of the food and evaporation of the water poured into the tank before
Note: if the food is not cooked enough, wait 10 minutes before opening the plug on the tank. Fill it up again and do another cycle, adjusting the amount of water.
REHEATING AND DEFROSTING
You can also use the steaming function to reheat food or jars of food and even defrost food in jars. Use 3 measures of water for reheating and 6 measures for defrosting.
Caution: when reheating or defrosting food in jars, always remove the lid from the jar before placing the opened jar in the steaming basket - fig. 10.
USING THE BLENDER FUNCTION
Remove the steaming basket and put the food in the blender bowl. Close the lid making sure it is locked in position.
Then place the bowl on the body of the appliance and turn the button to the blending position .
Proceed through successive presses until you obtain the desired consistency.
If the blended food remains stuck on the sides of the bowl, scrape it with the spatula and resume blending once you have locked the lid back in position.
Caution: never blend for more than 10 seconds at a time.
Assemble the joint as shown in figure 1, ensuring the direction is respected. The rounded part must be in contact with the blade.
29
