GettingStarted
10 AD007User Manual
Installing the Adapter on the Network
Usethe procedures in this section to install the AD007GPIB-LAN
Adapter on a network.
Contactingthe Network Administrator
Please contact your local network administrator or network servic es
before connecting the AD007 adapter. For your convenience, use the
network information card included in the Read This First guide, or
make two photocopies of the form shown in Figure 4.
Doesnetwork support DHCP or BOOTP? Yes -No -
Ifno, please note:
Subnetmask ____.____.____.____
Routeraddress ____.____.____.____
(Enterthese numbers on network setup page of the adapter, refer to user
manual)
Comments
___________________________________________________________
___________________________________________________________
(NetworkAdministrator: Keep one copy and give one copy to the user.)

Network Information Card

AD007 GPIB-LANAdapter

EthernetHardware A ddress____:____:____:____:____:____
(User:copy address from the label on the back of the AD007 adapter)
Internet(IP) Address____.____.____.____ Host Name______________
(NetworkAdministrator: for ease of set up, a static IP address is preferred)
Networkdrop (subnet) number and/or physical location
___________________________________________________________
(assignedby network technician)
Figure4: Network information card