
Reference
AD007User Manual 51
Resetto the Factory Defaults
The procedure to reset to factory defaults overrides current set tings
and sets the adapter to known settings. This makes it possible to
accessthe adapter from the known settings or to turn DHCP on. You
may resetto Factory defaults either at power on or during normal
operation.
NOTE. If you arenot using DHCP, use the factory default settings
onlyif youare sure they do not conflict with othersettings on the
network.If the settings conflict, use the procedurefor stand-alone
operationto access the adapter.
Toreset at power on, do these steps:
1. Power the AD007 adapter off.
2. Use a small tool or end of a paper clip to push in and hold the
reset button.
3. Power on the AD007 adapter and hold the reset button in until all
status indicators go to a steady amber (approximately 30 se-
conds), then release the button. The AD007 adapter automatically
reboots with the factory defaults.