GettingStarted
26 AD007User Manual
Accessing theWeb Page Interface
The AD007adapter has a built-in web server with onlineforms that
allow you to test the network connection, configure a printe r,and
make various network or GPIB settings. Use the following procedure
to accessthe web pages:
1. Start the web browser on your computer.
2. Open the location of the AD007 adapter assigned by your
networkadministrator:
http://AD007 host name or IP address/
3. Use the settings on your browser to save or bookmark this
location.
Ifyou successfully access the Home web page, the networkportion
of the installation is now complete. For more informati on about the
webpage interface, see Operating Basics on page 33.
If you only access a diagnostic web page, there is a problem with the
firmwarein the adapter. See the AD007 section in the Tektronix
SoftwareSol utions Installation manual (Tektronix part number
071--1140--01) for instructions on updating the AD007 firmware.
NOTE. If you cannot access any web page of the adapter,contact
your network administrator or network technician.
Do not change any parameterson the Ne twork Setup without
contactingyour network administrator.A passwordprotection utility
is available on the Home page to protect these settings. See page 35.
PasswordProtection
The settings on the web pages are password protected. If you try to
make changes to the settings, the browser will prompt you for a user
name and password. By default, the user name is ignored and the
passwordi s ad007 (lowercasea, lowercase d, zero, zero, 7). Toset a
new password,see pa ge 35. Toreset the password to the default
setting, see Resetting the Adapter on page 48.