Reference
AD007User Manual 49
Table4: Using the RESET button
DesiredResult
Whento push the
RESETbutton
Howlong to hold the
RESETbutton in
BypassDHCP/BOOTP
requestand reset to last
configuration
During LAN discovery
loop(DHCP/BOOTP
request)when LAN -Link
isamber
momentarily
Resetonly the password
tofactory default (ad007)
Readthe binary code of
theadapter IP address
onthe status indicators
Duringnormal operation momentarily
Resetentire configura-
tionto factory defaults
Duringnormal operation
orfrom power on
Untilall indicators are
steadyamber (~10
seconds)
BypassDHCP/ BOOTP and Reset to Last Configuration
Tobypass DHCP/BOOTP and reset to the last c onfiguration, do these
steps:
1. Power offthe AD007a dapter and wait a few seconds.
2. Power on the AD007 adapter and wait until the adapter tries to
discover the LAN (the LAN light begins to blink gre en/amber
afterthe self test).
3. Using a small tool or end of a paper clip, momentarily push in the
reset button. This bypasses the LAN discovery (DHCP request).
4. When the LAN-Link indicator turns from amber to green, the
AD007adapter has successfully loaded the lastconfiguration.