Reference
AD007User Manual 45
PowerOn
Table2 shows the sequenc e of status indications for power on. To
perform or repeat the power on sequence, unplug the power to the
adapter, wait a couple of seconds, then connect the power again.
Table2: AD007 status indicators for power on
Poweron status GPIB LAN L-Link Power
1.Off or power failure Ø Ø Ø Ø
2.Self testing (hardware) G/A G/A G/A G/A
3.S elf test failure R/Ø R/Ø R/Ø A
A A A A
4.Self test pass G/Ø G/Ø G/Ø G
5.LAN D iscoveryloop
(DHCP/BOOTPrequest)
Note:By default, the DHCP/BOOTP
requestcontinues to loop until serviced. To
exitthe loop, momentarily press the reset
button.The adapter will load the last
configurationfrom memory.
ØØ↔G/A A G
6.LAN OK ØØ↔G/A G G
G= Green R= Red A= Am ber Ø=Off/Idle
G/A = Togglesbetween green and amber
Ø↔G/A = forLAN and GPIB, Gi ndicates sending data, A indicates receiving
data,Øi ndicates idle