OperatingBasics
36 AD007User Manual
Network Setup
Atpower on, the AD007 automatically configures itsentire Network
Setup from a Dynamic Host Configuration Protocol (DHCP) or Boot
Protocol (BOOTP) server.If you do not have a server that supports
DHCP/BOOTP, youmay have to access the Network Setup page to
examine and change one or more of the following network settings.
HostConfiguration
If your server does not support the DHCP/BOOTP protocols, do
these steps to bypass the protocols:
1. Ifyou have access to the web pages, go the the Network Setup
pageand select DHCP Off.
2. Ifyou do not have access to the web pages, momentarily press
the reset button during power on to bypass the DHCP/BOOTP
request and reset to the last configuration. (For the locat ion of the
reset button, see Figure 11 onpa ge 48.)
Networking
Toallow the adapter to talk to other hosts on the local network,enter
the appropriate IP numbers for Adapter IP Address and Subnet Mask.
Toallow the adapter to talk to hosts on other networks, enter the
appropriate IP number for Router Address.