Tektronix AD007 - page 28

GettingStarted
14 AD007User Manual
SetupProcedure 1 - Complete Factory Reset, Set DHCP On
If the following conditions are true, you may want to complet ely
reset the adapter to the factory default setti ngs.
HThe adapter has been used before and is configured with
unknown settings.
HDHCPis off and the adapter does not request an IP address from
the network.
HYou ar e not ableto access the web pages of the adapter because
the adapter is configured with unknown settings.
HYouwanttoturnDHCPon.
Toreset to t he factory default settings (and turn DHCP on), do these
steps:
1. Power the AD007 adapter off.
2. Use a small tool or end of a paper clip to push in and hold the
reset button.
3. Power on the AD007 adapter and hold the reset button in until all
status indicators go to a steady amber (approximately 30 se-
conds), then release the button. The AD007 adapter automatically
reboots with the factory defaults.
4. Fora complete list of the factory default settings,see Table 6 on
page 52.