GettingStarted
22 AD007User Manual
GPIB LAN LAN-Link POWER
-- -- -- -- -- -- -- -- -- -- (3 0s eco nd se lf -te st, li gh ts bli nk am ber ) -- -- -- -- -- -- -- -- -- -- --
------ ---- ----(Self test pass,indicators momentarily blinkgreen) -- ------ ---- --
Off Green/Amber/Off Green
(unknownIP ad-
dressacquired)
Green
Toread and de code the IP address, do these steps:
1. Photocopy the chart on page 23. Get a pencil and prepare to fi ll
out the chart.
2. Locate the reset button on the bottom of the adapter. (For the
location of the reset button, see Figure 11 on page 48.)
3. Make sure status indicators are in the states listed above.
4. Using a small tool or end of a paper clip, momentarily push in t he
resetbutton. This initiates the adapter to display the IP address.
5. Marka 1 for each red indicator in the appropriate spaces (leave
spacesfor green indicators blank). When the indicatorsare all
amber, the value is a decimal point separator. Leading zeros are
ignored in each field.
6. Repeatthe test as necessary by pressing the reset buttonagain.
7. Afteryou have written the binary values down, convert the binary
valuesto decimal and write the decimal values in the spaces
provided.