GettingStarted
28 AD007User Manual
Toc onnect the AD007 GPIB-LAN Adapt er to the GPIB, do these
steps:
1. Connect the GPIB port of the adapter to the GPIB port(s) or
connector(s) for the instrument(s) that you wish to control. If
necessary,use the GPIB connector hardware provi ded. (See
Figure 8.)
129-1502-00
GPIBcable
GPIBport on
instrument
Figure8: Connecting to the GPIB
2. Turnon all devices connected to the GPIB. Wait forall poweron
routinesto finish.
3. Accessthe web page on the AD007 adapter.
4. Click GPIB Communications.
5. ClickPoll to refresh the list of active talk/listen instruments.
6. Verifythat the devices on thebus are listed.
7. If you change which devices are active on the bus or device
parameters, click Poll to rediscover the acti ve addresses on the
GPIB.