GettingStarted
AD007User Manual 31
NOTE. If you are attempting to communicate with a Tektronix
Windows-basedoscilloscope, make sure the VXI--11server is running
onthe oscilloscope before doing thefollowing procedure.
a. Selectthe Add button in the Remote Host List area. This
opens the Add Remote Host dialog.
b. Enterthe IP address or location name (some instrumentsuse
the VXI-11server to define a name)in the Host Name field.
c. SelectOK. The dialog closes, returns to the main TekVISA
window,and adds the IP address or loca tion name to the
RemoteHost field.
d. Selectthe Find button. The utility attempts to locate the
specifiedremote host address and lists it in the TekVISA
Resources field. It may take the program a few moments to
locate instruments, depending on network speed and load.
e. Repeatsteps athrough dto continue adding instrument
addresses.
f. Selectthe Xbutt on in the upper-right corner to save your
changes and exit the TekVISAResource Mana ger Configura-
tionutility program.
NOTE. The TekVISAResource Manager Configuration program must
be able to locate and register an instrument before you can set up
communications with connected instruments.
If theTekVISA Configurationutility cannot l ocate an instrument,
verifythat the AD007 is correctly configured:Refer to Appendix D:
Troubleshooting, and work with your system administrator to resolve
the problem.Also see the TekVISARelease Notes (Start > Programs
> TekVISA> Release Notes)and the online help file (Start >
Programs > TekVISA> TekVISA Resource Manager Help)for
TekVISA-specificinformation.