GettingStarted
16 AD007User Manual
5. When the LAN-Link indicator turns from red to off, the AD007
adapterhas successfully loaded the IP address:
GPIB LAN LAN-Link POWER
Off Off Off Green
NOTE. If your Internet web browser is configured to use the dialup
adapter,go into the Internet configuration dialog and change the
browserto use the local network. For more information, refer to the
documentation for your particular system.
6. In Windows,open t he Network Properties window by right-click-
ing on the Network icon in the Control Panel. (In Windows NT,
selectthe Protocols tab.)
7. IfTCP/IP is not listed as one of the protocols,you must install it
from the Windows installation CD-ROM disc.
8. Highlightthe TCP/IP and click on Properties. This opensthe
TCP/IP properties dialog box.
9. Clickon all the tabs and write down all the settings. This allows
you to restore them later if necessary.
10.Set the IP address of the PC to work with the currently configured
settingsof the adapter, or use the followingsettings that will
workwith the factory default settings of the AD007adapter. (You
mayhavetoclickonSpecifyanIPaddress.)
a. Assignthe PC an IP address with the firstthree numbers
that are the same as the current AD007 IP address. (For
example, the IP address 192.168.1.2 is acceptable if you
are using the factory default 192.168.1.1 address of the
adapter).
b. Assignt he numbers for the subnet mask. (For example,
assign the subnet mask 255.255.255.0 if you are using the
factorydefault settings).