Texas Instruments warranty TMS320DM355 Digital Media System-on-Chip DMSoC, Features

Models: TMS320DM355

1 155
Download 155 pages 17.5 Kb
Page 1
Image 1

TMS320DM355

Digital Media System-on-Chip (DMSoC)

www.ti.com

SPRS463A –SEPTEMBER 2007 –REVISED SEPTEMBER 2007

1 TMS320DM355 Digital Media System-on-Chip (DMSoC)

1.1 Features

High-Performance Digital Media System-on-Chip

216- and 270-MHz ARM926EJ-S Clock Rate

Fully Software-Compatible With ARM9

ARM926EJ-S Core

Support for 32-Bit and 16-Bit (Thumb Mode) Instruction Sets

DSP Instruction Extensions and Single Cycle MAC

ARM Jazelle Technology

EmbeddedICE-RT Logic for Real-Time Debug

ARM9 Memory Architecture

16K-Byte Instruction Cache

8K-Byte Data Cache

32K-Byte RAM

8K-Byte ROM

Little Endian

Video Processing Subsystem

Front End Provides:

Hardware IPIPE for Real-Time Image Processing

CCD and CMOS Imager Interface

14-Bit Parallel AFE (Analog Front End) Interface Up to 67.5 MHz

Glueless Interface to Common Video Decoders

BT.601/BT.656 Digital YCbCr 4:2:2 (8-/16-Bit) Interface

Histogram Module

Resize Engine

Resize Images From 1/16x to 8x

Separate Horizontal/Vertical Control

Two Simultaneous Output Paths

Back End Provides:

Hardware On-Screen Display (OSD)

Composite NTSC/PAL video encoder output

8-/16-bit YCC and Up to 18-Bit RGB666 Digital Output

BT.601/BT.656 Digital YCbCr 4:2:2 (8-/16-Bit) Interface

Supports digital HDTV (720p/1080i) output for connection to external

encoder

External Memory Interfaces (EMIFs)

DDR2 and mDDR SDRAM 16-bit wide EMIF With 256 MByte Address Space (1.8-V I/O)

Asynchronous16-/8-bit Wide EMIF (AEMIF)

Flash Memory Interfaces

NAND (8-/16-bit Wide Data)

OneNAND(16-bit Wide Data)

Flash Card Interfaces

Two Multimedia Card (MMC) / Secure Digital (SD/SDIO)

SmartMedia

Enhanced Direct-Memory-Access (EDMA) Controller (64 Independent Channels)

USB Port with Integrated 2.0 High-Speed PHY that Supports

USB 2.0 Full and High-Speed Device

USB 2.0 Low, Full, and High-Speed Host

Three 64-Bit General-Purpose Timers (each configurable as two 32-bit timers)

One 64-Bit Watch Dog Timer

Three UARTs (One fast UART with RTS and CTS Flow Control)

Three Serial Port Interfaces (SPI) each with two Chip-Selects

One Master/Slave Inter-Integrated Circuit (I2C) Bus™

Two Audio Serial Port (ASP)

I2S and TDM I2S

AC97 Audio Codec Interface

S/PDIF via Software

Standard Voice Codec Interface (AIC12)

SPI Protocol (Master Mode Only)

Four Pulse Width Modulator (PWM) Outputs

Four RTO (Real Time Out) Outputs

Up to 104 General-Purpose I/O (GPIO) Pins (Multiplexed with Other Device Functions)

On-Chip ARM ROM Bootloader (RBL) to Boot From NAND Flash, MMC/SD, or UART

Configurable Power-Saving Modes

Crystal or External Clock Input (typically 24 MHz or 36 MHz)

Flexible PLL Clock Generators

Debug Interface Support

PRODUCT PREVIEW

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this document.

I2C-bus is a trademark of Texas Instruments. Windows is a trademark of Microsoft.

All other trademarks are the property of their respective owners.

PRODUCT PREVIEW information concerns products in the

Copyright © 2007–2007, Texas Instruments Incorporated

formative or design phase of development. Characteristic data and

 

other specifications are design goals. Texas Instruments reserves

 

the right to change or discontinue these products without notice.

 

Page 1
Image 1
Texas Instruments warranty TMS320DM355 Digital Media System-on-Chip DMSoC, Features

TMS320DM355 specifications

The Texas Instruments TMS320DM355 is a versatile digital signal processor designed to support a wide array of multimedia applications, specifically in the realms of digital video and audio processing. As part of the TMS320 family of digital signal processors, the DM355 brings a blend of computational power, energy efficiency, and integrated features that make it highly effective for tasks such as video encoding, decoding, and general signal processing.

One of the standout features of the DM355 is its advanced DaVinci architecture, which is specifically optimized for multimedia tasks. This architecture integrates both DSP and application processing functionalities. The dual-core architecture includes a high-performance DSP core that specializes in real-time signal processing alongside an ARM926EJ-S RISC microprocessor, facilitating the execution of complex algorithms and control tasks.

The DM355 offers robust multimedia processing capabilities with support for several video formats, including MPEG-2, MPEG-4, H.264, and JPEG. This enables developers to create powerful video applications for a variety of devices, from industrial systems to consumer electronics. Its processing capabilities extend to audio processing, allowing it to efficiently handle audio codecs and enhance audio quality in applications ranging from IP cameras to set-top boxes.

In terms of connectivity, the TMS320DM355 supports various interfaces including USB 2.0, Ethernet, and various serial interfaces like UART, SPI, and I2C. This wide range of connectivity options ensures that the DM355 can easily interface with different peripherals and network components, making it a suitable choice for networked applications.

Energy efficiency is another significant advantage of the DM355. With a focus on low power consumption, the device is designed to operate effectively in battery-powered and heat-sensitive environments. Its low thermal design power allows for extended operational life and reduced thermal management requirements, making it ideal for portable devices.

Furthermore, the DM355 is supported by a comprehensive software development framework, including the TI Code Composer Studio and a range of middleware tools, which streamline application development and speed up time to market. Its rich ecosystem enhances its usability across different applications, ensuring that developers can leverage the full potential of the hardware.

In summary, the Texas Instruments TMS320DM355 stands out as a powerful yet cost-effective DSP solution, combining advanced multimedia processing capabilities, robust connectivity options, and energy efficiency. Its unique architecture and extensive support resources make it a preferred choice for developers seeking to create innovative multimedia solutions.