Thermador SEM272 Setting the Timer, To set TIMER 1 or TIMER, You Will See, To Change a Timer

Oven Operations SEM/SEMW Oven Care and Use Manual

Setting the Timer

•The oven has two Timers, which are independent of each other. Neither timer controls oven operations.

•Touch once and the Timer is set in minutes and seconds.

•Touch twice and the Timer is set in hours and minutes.

To set TIMER 1 or TIMER 2:

1.Select TIMER 1 or TIMER 2.

Message scrolls in display.

2 . Set the amount of time.

(Example shows a 3-minute setting with Timer 1.)

3 . Start Timer.

4 . When set time is complete, “End” is displayed and 2 long beeps signal. When turned off, display reverts to time of day.

Note: If timer is not turned off, beeps will continue every 30 seconds. After 5 minutes, beeps stop and the display reverts to the previous time of day.

Touch

TIMER 1

Touch

3 0 0

Touch

START

Touch

TIMER OFF

You Will See

MIN ––:––SEC

TIMER1

Touch TIMER 1 again for hrs and Min then select length of time then touch start

MIN3:00SEC

TIMER1

MIN3:00SEC

TIMER1

End

TIMER1

To Cancel an Active Timer:

Select TIMER 1 OFF or TIMER 2 OFF.

To Set Both TIMER 1 and TIMER 2:

•Follow the steps above to set each Timer. The Timer with the least amount of countdown time has display priority. The countdown display for the second timer is shown automatically when the first timer has ended.

•The words “TIMER 1” and “TIMER 2” are both displayed along with the number countdown.

•The designation, “TIMER 1” or “TIMER 2” with the least remaining countdown time is more brightly lit than the other.

•During the countdown, touch CLOCK or TIMER. Depending on the pad touched, either the time of day or the remaining time is briefly displayed.

To Change a Timer:

1.Touch TIMER 1 or TIMER 2.

2.Enter the new desired time.

3.Touch the START pad.

12