SEM/SEMW Oven Care and Use Manual |
Do-It-Yourself Maintenance
Replacing the Oven Light
CAUTIONS:
To prevent personal injury:
•Before replacing the light bulb, be sure the electric power is turned off at the circuit breaker.
•Halogen bulbs get HOT instantly when turned ON.
•Be sure the oven and light bulb are cool.
•Do not operate the oven unless the light cover is securely in position.
CAUTION: If the light cover is damaged or broken, do not use the oven until a new cover is in place.
The oven lights are located on the top ceiling wall of the oven. The lights have a removable lens cover and a halogen light bulb. The ceramic light socket housing is not removable by the user.
Replace bulb with a
10W HALOGEN
LAMP
Lens
Fixing
Clip
Holder Clip
Housing
Ceramic Holder
10.Place the fixing clip on the lens cover.
11.Slide the protective lens into the holder clip and push the other end until the fixing clip snaps back into the housing.
12.Turn on circuit breaker.
To replace Halogen Bulb:
1.Turn off circuit breaker.
2.Remove oven racks.
3.Slide the tip of a table knife blade between the fixing clip and the glass lens cover.
4.Support the glass lens cover with two fingers along the bottom edge to prevent the cover from falling to the bottom of the oven.
5Gently twist the knife blade to loosen the glass lens cover.
6. Remove the glass lens cover and fixing clip.
7Remove the bulb by grasping and sliding the bulb straight up until the two prongs have cleared the ceramic holder.
8.Do not touch the glass of the new replacement bulb with your fingers. It will cause the bulb to fail when it first lights. Grasp the replacement bulb with a clean paper towel or facial tissue with the prongs facing down. Locate the two prongs in the ceramic holder, gently poking until the two prongs locate in the ceramic socket.
9.Press down to seat the bulb.
Changing to the 24-Hour Clock Format
The oven has been preset to a 12- hour clock format.
To change the
1.Turn off both ovens.
2.Touch START and hold the CLOCK pad at the same time.
3.12H appears in the Clock window; release both pads.
4.Touch CLOCK and 24H replaces 12H. This al- ternates when CLOCK is touched.
5.To complete the change, touch START.
33
