Toshiba BDRV-WBX8-Z31 Version 7.2.4 M-3 Installation method by operating systems

- 15 -

 Installation method by operating systems

Connection method

Plug and Play is not used. Plug and Play is used.

RS-232C LAN Parallel USB Parallel (*1)

Windows 2000 Section 2.4 Install under

Windows 2000 (USB

interface with plug and

play enabled)

Section 2.7 Install under

Windows 2000 (Parallel

interface with plug and

play enabled)

Windows XP

Windows Server 2003

Section 2.2 Install under

Windows 2000/XP/Server2003

Section 2.5 Install under

Windows XP/Server2003

(USB interface with plug

and play enabled.)

Section 2.8 Install under

Windows XP/Server2003

(Parallel interface with

plug and play enabled)

Windows Vista

Windows Server 2008

Windows 7

Windows Server 2008

Section 2.3 Install under

Windows Vista/Server2008/7

Section 2.6 Install under

Windows

Vista/Server2008/7 (USB

connection with plug and

play enabled)

Section 2.9 Install under

Windows

Vista/Server2008/7

(Parallel interface with

plug and play enabled)

*1: If you choose the parallel interface with plug and play enabled, you need to change some parameter settings on the

printer. The “plug and play” feature has been disabled as default for the parallel interface connection. See the

following.

In the case installing a shared printer, follow the procedure described in “To print on the shared printer” in

Section 2.2 Installation under Windows 2000/XP/Server2003 and Section 2.3 Installation under Windows

Vista/Server2008/7/Server2008R2. When you want to use Plug and Play, follow the above procedure.

 Printer parameter settings when installing the printer driver via parallel interface with plug and play enabled:

B-SX4, B-SX4-CN, B-SX5, and B-SX5-CN

Start the printer in the system mode, enter the <2>PARAMETER SET menu, and set the following parameters

as below:

CENTRO. MODE:....................................... ECP (Default: SPP) Enables an installation of the printer driver

with plug and play

PLUG & PLAY: ON (Default: OFF) .......... Enables monitoring the printer status. ( Status Window

Preferences in Section 3.6 Tools Tab.)

When you use the bi-directional communication, set the CENTRO. MODE to ECP and PLUG & PLAY to ON,

respectively. The parameter setting procedure is provided in Section 6.2 Parameter Setting on the Printer.

B-SA4G, B-SA4G-CN, B-SA4T, B-SA4T-CN, B-852-R, B-452-R, B-SX6T-R, and B-SX8T-R

Start the printer in the system mode, enter <2>PARAMETER SET menu, and set the following parameter:

PLUG & PLAY: ON (Default: OFF)........... Enables an installation of the printer driver with plug and play

Since the printer status monitor cannot be used, disable the “Bi-directional support” in the Properties of the

printer driver.