Toshiba BDRV-WBX8-Z31 Version 7.2.4 M-3

- 39 -

2.6 Installation under Windows Vista/Server

2008/7/Server2008R2 (USB with Plug & Play Enabled)

Note: If an undefined device is created after installation of the printer driver, follow the procedure described in the

section If plug-and-play installation fails under Windows Vista/Server2008/7/Server2008R2.

1. Turn on the PC.

Note: Log on as the user with administrative privilege.

2. Turn on the printer and connect it to the PC with a USB cable.

3. Installation of the device driver software is automatically started.

4. After a while, the printer driver installation is completed.

5. When the installation is completed, a new printer icon is added to the Printer folder.

Note: For the B-419, be sure to disable the “Bi-directional support” after the installation of the printer driver. For

details, refer to Section 6.1 How to Enable Bi-directional Communication Support.

Contents

Main TOSHIBA Bar Code Printer Printer Driver Operating Manual 8th Edition: March 5, 2012 Table of Contents Introduction 1. General Description 1.1 Features 1.2 Applicable printers 1.3 Notation 1.4 Screens Used in This Document 1.5 Trademark and Copyright 1.6 Operational Conditions 1.6.1 Operation System 1.6.2 Hardware 1.7 Cautions for Installation (IMPORTANT) Specifying a network path for the printer port 1. 2. 3. - 6 - Configuration for the Status Monitor Page Page Page Page Page How to open the Properties with the administrative privilege How to set up Windows Vista/Server2008/7/Server2008R2 again 1. 2. If plug-and-play installation fails under Windows Vista/Server2008/7/Server2008R2 1. 2. 2. Installation Procedure Preparatory Procedure Common to All Models Printer driver installation method Installation method by operating systems 2.1 Preparation for Installation 1. 2. 3. 4. 5. 2.2 Installation under Windows XP/Server2003 1. 2. 3. 4. 5. 6. 7. 8. - 20 - 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. To print on the shared printer 1. 2. 3. 4. 5. 6. 7. 2.3 Installation under Windows Vista/Server2008/7/Server2008R2 1. 2. 3. 4. 5. 6. TEC from the Manufacturer list. 7. 8. 9. 10. 11. 12. To print on the shared printer (1) 1. 2. 3. 4. 5. 6. 7. To print on the shared printer (2) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 2.4 Installation under Windows 2000 (USB with Plug & Play Enabled) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 2.5 Installation under Windows XP/Server2003 (USB with Plug & Play enabled) 1. 2. 3. 4. 5. 6. 7. 8. 9. Page 2.7 Installation under Windows 2000 (Parallel interface with Plug & Play Enabled) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 2.8 Installation under Windows XP/Server2003 (Parallel interface with Plug & Play Enabled) 1. 2. 3. 4. 5. 6. 7. 8. 9. Page 2.10 Uninstalling the Printer Driver 2.10.1 To delete the printer drivers except for V6.5 Build75 and V6.5 Build77 In the case of deleting the printer drivers except for V7.2.4 M-3 2. 3. 4. 5. 6. Deleting the setup information configured during the preparation 1. 2. Page 3. Functions Property setting menus in the Printing Preferences Page Page Property setting menus in the Properties Page Page 3.1 Page Setup Tab Stock ) Orientation Effects 3.1.1 Registering a new stock or editing the existing stock Stock Label Size Exposed liner width Automatic Preset Selection 3.1.2 Preset Preset Management 3.1.3 Advanced Options Printing Position User Commands tab Driver Option tab Page 3.2 Graphics Tab Resolution Dithering Color Control 3.3 Stock Tab Media Settings Issue Settings Fine Adjustment 3.4 Options Tab Graphic Options Print Density Adjustment Feed Adjustment Supply Options 3.4.1 Multiple Part Print Area Settings (B-419 and B-EV4-G only) Multiple Part Print Area Page 3.4.2 Ribbon Adjustments Ribbon Type Ribbon Motor Voltage Adjustment 3.5 Fonts Tab Font ) View Tools Resident Fonts tab Utility Fonts tab Encoding tab 3.5.1 Bar Code Font Font Bar Code Options Symbology Specific Options 3.6 Tools Tab Printer Generic test Test Print Head Send Printer Command Send File To Printer Page Driver Page Page Page 3.7 Designation of Printer Font Example of selecting a font on the application Example of bar code font programming (Visual Basic 5.0/6.0) Restrictions of Bar Code Fonts Page - 88 - Correspondence table of the specified size of TEC Kanji and actually printed size 4. System Configuration 4.1 System Configuration Example Example 1 In the case a Windows PC is directly connected to the printer. Page 5. Addition/Deletion of Standard TCP/IP Port 5.1 Addition 1. 2. 3. 4. 5. 6. 7. 8. 9. 5.2 Deletion 1. 2. 3. 6. Appendix 6.1 How to Enable Bi-directional Communication Support 1. 2. 3. - 98 - 6.2 Parameter Setting on the Printer - 99 - 6.3 How to Connect the Printer to LAN